Manufacturing Capabilities
The processes, materials, finishing options and inspection routine behind our quotations. Any figure that depends on specific equipment is shown as a marked placeholder until it is confirmed.
Illustrative imageMachining runs on six CNC centres, one of them 5-axis, within a 200 mm working envelope and to a general tolerance of ±0.01 mm on machined features. Anything outside that envelope is checked with you before quoting.
Publishing rule: nothing on this page is claimed as a capability until the company confirms it. Placeholders are marked “TBC”.
Capability Ranges
Confirmed values replace these placeholders before launch.
| Max. size (milling) | To be confirmedTBC |
|---|---|
| Max. size (turning) | To be confirmedTBC |
| Max. build size (printing) | To be confirmedTBC |
| General tolerance | To be confirmedTBC |
| Minimum order | 1 piece |
Machining
Machining capacity
Six CNC machining centres, including one 5-axis machine.
CNC milling
Pockets, profiles, facing, contouring, engraving.
CNC turning
Shafts, bushings, flanges, with milling where needed.
Drilling & tapping
Metric, unified and pipe threads, blind holes included.
Multi-axis
One 5-axis centre for parts needing several faces in a single setup.
Prototyping
SLA resin printing
High detail for appearance models, figures and fine features.
Nylon / clear / soft rubber
Functional printing with tougher, transparent or flexible material.
Red wax carving
Fine carving for small, highly detailed parts.
Vacuum casting
Silicone mould copies from your master, typically 10 to 200 pieces.
Materials
Plastics
ABS, PC, POM, PMMA (acrylic) and nylon.
Metals
Aluminium, copper and stainless steel [object Object]
Casting materials
ABS-like, PU, soft rubber-like and transparent materials.
Specified otherwise
Materials named on your drawing are confirmed during review.
Finishing
Sanding
Support marks, tool marks and layer lines removed by hand.
Painting
Colour matched to your reference or sample.
Silk printing & laser engraving
Logos, markings and fine details.
Anodising & bonding
Aluminium treatment plus multi-part assembly.
Inspection
Incoming check
Material verified before it reaches a machine.
In-process checks
Critical dimensions measured during production.
Final inspection
Measured against the drawing with calibrated tools.
Reports
Dimensional reports supplied on request.
Supported File Formats
STEP / STP | Preferred for 3D. |
IGES / IGS | 3D surfaces. |
STL | 3D printing only — state units. |
SLDPRT / DWG / DXF | SolidWorks, 2D drawings and profiles. |
PDF / OBJ / 3MF | Drawings, artwork and sculpt models. |
What To Include In An Enquiry
- 3D model and dimensioned drawing for critical features
- Material and surface finish
- Quantity — first order and repeats
- Destination and target date
Send us your drawing and we will come back with a quote
Upload a 3D file, a drawing or even reference photos with dimensions. We review manufacturability before quoting.